Dell Vostro 1700 (Early 2009) - Manual (Page 162)

162
Adding and Replacing Parts
Replacing the Keyboard
1 Hook the tabs and the keyboard connector along the front edge of the
keyboard into the palm rest, and place the notch on the top of the
keyboard on the tab on the base of the computer.
2 Keeping the keyboard flat against the computer base, slide the tabs on the
bottom of the keyboard under the palm rest, and ensure the tab on the
computer base slides into the notch on the top of the keyboard.
1 keyboard 2 keyboard screws (4)
3 notch on keyboard 4 tab on computer base
2
1
4
3