Dell B2375dfw Mono Multifunction Printer - Manual (Page 111)

– Deleting the SNMP traps
a From the Embedded Web Service, select the Settings tab
Network Settings
SNMP SNMPv1/v2 SNMP Traps.
b Check the checkbox of the name(s) you want to delete from the list and click the
Delete button above the list.
c A confirmation window appears. Click on Yes.
– Editing the SNMP traps
a From the Embedded Web Service, select the Settings tab
Network Settings
SNMP SNMPv1/v2 SNMP Traps.
b Check the checkbox of the name) you want to edit from the list and click the Edit
button above the list.
c Change the necessary information.
d Click Apply.
SNMPv3
You can set SNMPv3 settings.
• General
– SNMPv3 Protocol : Check to enable SNMPv3 protocol.
• Authentication
– User Name : Check to enable SNMPv3 protocol.
– Authentication Password : Enter the password you want to use for
read-and-write authentication.
– Confirm Password : Re-enter the password for confirmation.
– Authentication Algorithm : Select authentication method.
• Privacy
– Privacy Password : Enter the password used to encrypt SNMPv3
request/response.
– Confirm Password : Re-enter the Privacy Password for confirmation.
– Privacy Algorithm : Shows the algorithm used to encrypt the SNMPv3
request/response. Only DES algorithm is supported, you can not change it
manually.
SNMP/iPrint
• SNMP/iPrint
– SNMP/iPrint : Select your operate system.
- 110 ­