Dell B2375dfw Mono Multifunction Printer - Manual (Page 46)

Connecting the Printer to the Network
1 Ensure that the printer, computer, and any other attached devices are powered off and
unplugged.
2 Connect one end of a standard category 5 Unshielded Twisted Pair (UTP) network
cable to a LAN drop or hub, and the other end to the Ethernet network port on the
back of the printer. The printer automatically adjusts for the network speed.
NOTE: After connecting the printer, you need to configure the network parameters
on the operator panel. See "Configuring Network Parameters on the Operator
Panel".
- 45 ­