Dell B2375dfw Mono Multifunction Printer - Manual (Page 121)

– Backup Server : Enter the back up server address.
– Port Number : Enter the backup port number. 88 is set as a default value.
4 Click Apply.
Deleting a Kerberos server
1 From the Embedded Web Service, select the Security tab Network Security
External Authentication Server Kerberos Server.
2 From the Kerberos server list, check the server(s) you want to delete.
3 Click the Delete button.
4 A confirmation message appears, click Yes.
Editing a Kerberos server
1 From the Embedded Web Service, select the Security tab Network Security
External Authentication Server Kerberos Server.
2 From the Kerberos server list, check the server(s) you want to edit.
A pop-up window appears.
3 Change the necessary information.
4 Click Apply.
Testing a Kerberos server
1 From the Embedded Web Service, select the Security tab Network Security
External Authentication Server Kerberos Server.
2 From the Kerberos server list, check the server you want to test.
NOTE: The server to be tested should be selected from the list of servers that were
added by using the adding a server feature.
3 Click the Test button.
SMB Server
You can set SMB server settings.
Adding a SMB server
1 From the Embedded Web Service, select the Security tab Network Security
External Authentication Server SMB Server.
2 Click the Add button.
A pop-up window appears.
3 Enter the necessary information.
• Required Information
– Domain : Enter the domain name to be used for Log in. You can enter up to 128
characters. You can only use ASCII 32 - 35, 37 - 63, 65 - 123, or 125 character sets.
– Server Address : Enter the default server.
- 120 ­