Dell B2375dfw Mono Multifunction Printer - Manual (Page 122)

– Port Number : Enter the default port number from 1 to 65535. 445is set as a
default value.
• Standard port number for SMB over NetBIOS is 139.
• Standard port number SMB over TCPIP direct is 445.
– Make to Default Server : Select to make it a default server.
• Additional Information
– Backup Server : Enter the backup server.
– Port Number : Enter the backup port number from 1 to 65535. 445is set as a
default value.
4 Click Apply.
Deleting a SMB server
1 From the Embedded Web Service, select the Security tab Network Security
External Authentication Server SMB Server.
2 From the SMB server list, check the server(s) you want to delete.
3 Click the Delete button.
4 A confirmation message appears, click Yes.
Editing a SMB server
1 From the Embedded Web Service, select the Security tab Network Security
External Authentication Server SMB Server.
2 From the SMB server list, check the server(s) you want to edit and click Edit.
A pop-up window appears.
3 Change the necessary information.
4 Click Apply.
Testing a SMB server
1 From the Embedded Web Service, select the Security tab Network Security
External Authentication Server SMB Server.
2 From the SMB server list, check the server you want to test.
NOTE: The server to be tested should be selected from the list of servers that were
added by using the adding a server feature.
3 Click the Test button.
LDAP Server
You can set LDAP server settings.
Adding a LDAP server
1 From the Embedded Web Service, select the Security tab Network Security
External Authentication Server LDAP Server.
- 121 ­