Dell B2375dfw Mono Multifunction Printer - Manual (Page 191)

2-Up or 4-Up copying (N-up)
1 2
1 2
3 4
2
1
2-up copying 2-up copying 4-up copying 4-up copying
(Portrait) (Landscape) (Portrait) (Landscape)
The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet
of paper. This special copy mode can be applied when you load a document using only the
DADF.
NOTE: You cannot adjust the copy size using the Zoom menu for making a 2 Up or
4 Up copy.
1 Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document".
2 Press Copy Layout 2-Up or 4-Up from the home screen.
OR
Press Multiple-Up Copy
Multiple-Up 2-Up or 4-Up from the home screen.
3 Select 2-Up or 4-Up.
• 2-Up: Copies two separate originals onto one page.
• 4-Up: Copies four separate originals onto one page.
4 Press the left/right arrows to select Portrait or Landscape according to the original
paper’s orientation.
5 If necessary, customize the copy settings including number of copies, darkness,
original size, and original type. See "Using Copy and Setting Options".
6 Press
to go to the upper menu.
7 Press Start (
) on screen to begin copying.
NOTE: You can cancel the copy job at any time. Press ( ) on screen, and
the copying will stop.
Booklet Copying
The machine automatically prints on one or both sides of the paper, which are then folded
to produce a booklet with all the pages in the correct sequence.
The machine will also reduce and correctly adjust the position of each image to fit on the
selected paper.
- 190 ­