Canon ELURA 50 - Manual (Page 124)

124
E
Using a Memory Card
Make sure a memory card that has still images recorded on it has been inserted
into the camcorder.
1. With a still image in the display, open the menu and select CARD
OPER.
2. Select PRINT MARKS ALL ERASE.
• ERASE ALL PRINT MARKS ? YES NO appears in the display.
3. Select YES and press the SET button.
• The print mark disappears from the still image.
4. Close the menu.
PRINT MARKS ALL ERASE CARD OPER.
( 39)
+ PLAY
(VCR)
CARD
Notes:
• To cancel a print mark, move the frame to the print-marked still image, set the
number of prints to 0 (zero) with the selector dial and press the SET button. The
print mark disappears.
• If there are a large number of images recorded on the memory card, it may take
time for a print mark to appear on a still image.
Erasing all print marks