Canon ELURA 50 - Manual (Page 154)

154
E
Additional
Information
• AV/PHONES is not set to AV in the
menu ( 33).
• AV
\ DV OUT (Analog-digital
converter) is not set to OFF in the
menu (
91).
• The video heads need cleaning
( 149).
• The TV/VIDEO selector on the TV
isn’t set to VIDEO ( 34-35).
• The speaker has been turned off with
the selector dial ( 32).
• Headphones are being used.
? There’s no picture on the TV
screen.
? There’s no picture on the TV
screen, even though the tape is
moving.
? There’s no sound coming from the
speaker during playback.
Memory card operations
Cause and/or what to do about it
• It is not turned the right way
( 101). Turn it the right way and
try inserting again.
• Turn the camcorder’s power off and
back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.
• The camcorder is not set to CARD
CAMERA or CARD PLAY (VCR)
mode (
106, 116).
• The memory card is not inserted
( 101).
• You are using an SD Memory Card
and it is set for erasure prevention.
Change the position of the protect
switch.
• The memory card is full. Erase
images ( 120) or insert a new
memory card.
• The power source is not properly
connected, or the battery pack is
exhausted or not properly attached
(
13-16, 146).
• The function cannot be used in that
recording program ( 57).
Problem
? The memory card will not insert.
? The
mark flashes red in the
display even though a memory
card has been inserted.
? Nothing happens when I press the
buttons.