Canon ELURA 50 - Manual (Page 18)

18
E
Mastering
the Basics
Protecting tapes from accidental erasure
To protect your recordings from accidental erasure, slide the tab on the cassette to
the left. (This switch position is usually labeled SAVE or ERASE OFF.)
If you load a protected cassette in TAPE CAMERA mode, the message “THE
TAPE IS SET FOR ERASURE PREVENTION” appears for approx. 4 seconds
and
v starts flashing. If you wish to record on that cassette, slide the tab back to
the right.
SAVE
REC
SAVE
REC
• Do not use tapes that have been jammed as video heads may become dirty.
• Rewind tapes after use. If the tape becomes slack and damaged, it may cause
picture and sound distortion.
• Return cassettes in the case and store them upright.
• Do not leave the cassette in the camcorder after use.
• Do not use cassettes with spliced tapes or nonstandard cassettes as they may
damage the camcorder.
• Do not insert anything into the small holes of the cassette, or cover them with
cellophane tape.
• Handle cassettes with care. Do not drop or subject them to severe impact as this
may damage the cassettes.
• Rewind tapes from time to time if they are stored for a long time.
• With cassettes equipped with a memory function, metal plated terminals may
become dirty with use. Clean the terminals with a cotton swab after about 10
times of loading/unloading. The memory function is not supported by the
camcorder.
Cassette Handling Precautions