Preparing the camcorder, 144 e – Canon ELURA 50 User Manual

Page 144

Advertising
background image

144

E

Additional

Information

Be careful not to leave the viewfinder exposed to bright sunlight, or it will
melt. (The light is concentrated by the viewfinder lens.) Do not direct the
viewfinder to the sun.

Preparing the Camcorder

• Set the camcorder to TAPE CAMERA

mode. Adjust the viewfinder focusing
lever to suit your eyesight.

• To view with the viewfinder, make sure

the LCD panel is either turned so that
the subject can monitor viewing, or
totally closed with the screen facing
inwards.

Adjusting the viewfinder

Preparing the lens cap

• Attach the cord to the lens cap, and

pass the grip belt through the loop on
the cord.

• Hook the lens cap on to the grip belt

while you are recording, and place it
over the lens when you have finished.

Fastening the grip belt

• Release the Velcro fastening and hold

the camcorder with your right hand
while you adjust the belt with your left.
Your index finger should reach the
zoom control and photo button, and
your thumb should reach the start/stop
button comfortably.

Advertising