Canon ELURA 50 - Manual (Page 162)

162
E
Additional
Information
CARD PLAY (VCR) Mode
SLIDE SHOW 101–0143
43/50
640 480
12:00 PM
JAN.1,2003
Print mark ( 119) Protect mark ( 119)
Folder number-
File number ( 104)
Current still image/
Total still images
Slide show ( 118)
Accessing
a memory card ( 116)
Data code ( 80)
Time Code
This records counter information, including hour, minute,
second, and frame number on a special data code area on
the tape itself. It is reset automatically when a new tape is
loaded. In TAPE CAMERA mode, the frame number
doesn’t appear in the display.
Recording reminder
When you start recording, the camcorder counts from 0SEC
to 10SEC. Shots which are shorter than ten seconds may be
difficult to edit later. On the other hand, if you are not
planning to edit the recording, remember that a shot which
does not contain action should generally last no longer than
10 seconds.
“ AUTO POWER OFF”
The camcorder will turn itself off if you leave it in record
pause mode for more than about 5 minutes. This display
appears 20 seconds (approx.) before the camcorder turns
off.
0sec
10sec
0:12:34:12
AUTO POWER OFF AUTO POWER OFF