Dell PowerEdge T100 - Manual (Page 35)

Using the System Setup Program
35
Integrated Devices Screen
Table 2-6 lists the options and descriptions for the information fields that
appear on the Integrated Devices screen.
Table 2-5. SATA Configuration Screen
Option Description
Embedded SATA Enables (ATA Mode) or disables (Off) all SATA ports.
Port X Enables (Auto) or disables (Off) the SATA hard drive in
Port X.
Model Displays the drive model of the selected hard drive.
Drive Type Displays the drive type of the selected hard drive.
Capacity Displays the total capacity of the selected hard drive.
Table 2-6. Integrated Devices Screen Options
Option Description
Diskette Controller Enables the diskette controller. When set to Auto (the
default), each channel of the diskette controller is enabled
if IDE devices are attached to the channel and the
external diskette controller is not detected.
User Accessible USB Ports
(All Ports On default) Enables or disables the user accessible USB ports. Options
are All Ports On, Only Back Ports On, or All Ports Off.
Embedded Gb NIC
(Enabled with PXE
default) Enables or disables the system's integrated NIC. Options
are Enabled with PXE, Enabled without PXE, and
Disabled. PXE support allows the system to boot from the
network. Changes take effect after the system reboots.
MAC Address Displays the MAC address for the integrated 10/100/1000
NIC. This field does not have user-selectable settings.
Serial Port 1
(COM1 default) Sets the serial port to OFF or COM1.
If Console Redirection is Enabled, Serial Port 1 is
automatically set to COM1, which becomes locked to
ensure the console redirection function.
Speaker
(On default) Enables or disables the system internal speaker.
book.book Page 35 Wednesday, June 24, 2009 8:21 AM