Replacing the bezel – Dell PowerEdge T100 User Manual
Page 97
Advertising
Installing System Components
97
Figure 3-29.
Removing the Bezel
Replacing the Bezel
1 Align the bezel with the chassis frame and slide it into position.
2 Secure the alignment tabs into their alignment slots.
3 Attach the two bezel release screws to secure the bezel to the system
chassis. See Figure 3-29.
4 Replace the processor fan. See "Replacing the Cooling Fans" on page 87.
5 Reinstall the heat sink and shroud assembly. See "Replacing the Processor"
6 Close the system. See "Closing the System" on page 47.
7 Reconnect the system to the electrical outlet, and turn on the system.
1
alignment slot
2
bezel release screws (2)
3
bezel
4
alignment tab
3
2
1
4
book.book Page 97 Wednesday, June 24, 2009 8:21 AM
Advertising