Dell PowerEdge T100 User Manual
Page 82
Advertising
82
Installing System Components
Figure 3-21.
Installing and Removing the Heat Sink
6 Release the socket-release lever before opening the processor shield. See
7 Rotate the processor shield upward and out of the way.
8 Lift the processor out of the socket and leave the release lever up so that
the socket is ready for the new processor.
NOTICE:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
1
heat sink and shroud assembly
2
pivot bracket
3
captive screws (2)
4
diskette cable
1
2
3
4
book.book Page 82 Wednesday, June 24, 2009 8:21 AM
Advertising