Dell PowerEdge T100 - Manual (Page 52)

52
Installing System Components
Figure 3-5. Removing and Replacing the Blank Drive Insert
Diskette Drive
The 3.5-inch drive bay supports an optional standard diskette drive.
Removing the Diskette Drive
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2 Open the system. See "Opening the System" on page 47.
1 tab 2 blank drive insert
3 drive blank alignment screw
2
3
1
book.book Page 52 Wednesday, June 24, 2009 8:21 AM