Dell Inspiron One 2330 (Mid 2012) - Manual (Page 101)

System Board 101
Replacing the System Board
Procedure
1 Align the screw holes on the system board with the screw holes
on the chassis.
2 Replace the screws that secure the system board to the chassis.
3 Connect all the cables to the system-board connectors.
Postrequisites
1 Replace the wireless mini-card.
See "Replacing the Wireless Mini-Card" on page 53.
2 Replace the processor. See "Replacing the Processor" on page 69.
3 Replace the processor heat-sink fan.
See "Replacing the Processor Heat-Sink Fan" on page 65.
4 Replace the processor heat-sink.
See "Replacing the Processor Heat-Sink" on page 61.
5 Replace the I/O board shield.
See "Replacing the I/O Board Shield" on page 82.
6 Replace the I/O cover. See "Replacing the I/O Cover" on page 77.
7 Replace the power-supply fan bracket.
See "Replacing the Power-Supply Fan Bracket" on page 73.
8 Replace the memory modules.
See "Replacing the Memory Module(s)" on page 35.
9 Replace the system-board shield.
See "Replacing the System-Board Shield" on page 49.
10 Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 42.
11 Replace the back cover. See "Replacing the Back Cover" on page 22.
12 Replace the stand. See "Replacing the Stand" on page 19.
13 Follow the instructions in "After Working Inside Your Computer" on page 11.
OM_Book.book Page 101 Saturday, October 6, 2012 12:50 AM