Replacing the wireless mini-card, Procedure – Dell Inspiron One 2330 (Mid 2012) User Manual
Page 53
Wireless Mini-Card
53
Replacing the Wireless Mini-Card
Procedure
1 Align the notch on the Mini-Card with the tab on the
system-board connector.
CAUTION:
Use firm and even pressure to slide the Mini-Card into place. If you
use excessive force, you may damage the connector.
CAUTION:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the Mini-Card and on the system board,
and realign the Mini-Card.
CAUTION:
To avoid damage to the Mini-Card, never place cables under
the Mini-Card.
2 Insert the Mini-Card connector at a 45-degree angle into the
system-board connector.
3 Press the other end of the Mini-Card down into the slot on the
system board and replace the screws that secure the Mini-Card to
the system-board connector.
4 Connect the antenna cables to the connectors on the Mini-Card.
The following table provides the antenna cable color scheme for the
Mini-Card supported by your computer.
Connectors on the Mini-Card
Antenna Cable Color Scheme
WLAN + Bluetooth (2 cables)
Main WLAN + Bluetooth (white triangle)
Auxiliary WLAN + Bluetooth (black triangle)
white
black
OM_Book.book Page 53 Saturday, October 6, 2012 12:50 AM