Dell Inspiron One 2330 (Mid 2012) - Manual (Page 65)

Processor Heat-Sink Fan 65
Replacing the Processor Heat-Sink Fan
Procedure
1 Align the screw holes on the processor heat-sink fan with the screw holes
on the chassis.
2 Replace the screws that secure the processor heat-sink fan to the chassis.
3 Connect the processor heat-sink fan cable to the system-board connector.
4 Adhere the aluminum foil on the processor heat-sink fan over the
processor heat-sink.
Postrequisites
1 Replace the system-board shield.
See "Replacing the System-Board Shield" on page 49.
2 Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 42.
3 Replace the back cover. See "Replacing the Back Cover" on page 22.
4 Replace the stand. See "Replacing the Stand" on page 19.
5 Follow the instructions in "After Working Inside Your Computer" on page 11.
OM_Book.book Page 65 Saturday, October 6, 2012 12:50 AM