I/o board shield, Removing the i/o board shield, Prerequisites – Dell Inspiron One 2330 (Mid 2012) User Manual
Page 79
I/O Board Shield
79
21
I/O Board Shield
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the I/O Board Shield
Prerequisites
1 Remove the stand. See "Removing the Stand" on page 17.
2 Remove the back cover. See "Removing the Back Cover" on page 21.
3 Remove the VESA-mount bracket.
See "Removing the VESA-Mount Bracket" on page 41.
4 Remove the system-board shield.
See "Removing the System-Board Shield" on page 47.
5 Remove the power-supply fan bracket.
See "Removing the Power-Supply Fan Bracket" on page 71.
6 Remove the I/O cover. See "Removing the I/O Cover" on page 75.
OM_Book.book Page 79 Saturday, October 6, 2012 12:50 AM