Replacing the optical drive, Procedure, Postrequisites – Dell Inspiron One 2330 (Mid 2012) User Manual
Page 40
40
Optical Drive
Replacing the Optical Drive
Procedure
1 Align the optical-drive bezel with the optical drive and snap it into place.
2 Align the screw holes on the optical-drive bracket with the screw holes on
the optical drive.
3 Replace the screws that secure the optical-drive bracket to
the optical drive.
4 Slide the optical drive into position and ensure that the screw holes on the
optical drive bracket align with the screw holes on the chassis.
5 Replace the screws that secure the optical drive to the chassis.
6 Connect the power and data cable to the connector on the optical drive.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 22.
2 Replace the stand. See "Replacing the Stand" on page 19.
3 Follow the instructions in "After Working Inside Your Computer" on page 11.
OM_Book.book Page 40 Saturday, October 6, 2012 12:50 AM