Dell Inspiron One 2330 (Mid 2012) - Manual (Page 116)

116 Display Panel
Replacing the Display Panel
Procedure
1 Align the screw holes on the display brackets with the screw holes on
the display panel.
2 Replace the screws that secure the display brackets to the display panel.
3 Gently place the display panel over the middle frame.
4 Replace the screws that secure the display assembly to the middle frame.
5 Connect all the touchscreen-board cables to the connectors on the
display assembly.
6 Adhere the tape over the connectors.
7 Route the touchscreen-board cables through the chassis.
8 Place the chassis over the display panel and align the screw holes on the
chassis with the screw holes on the display.
9 Replace the screws that secure the chassis to the middle frame.
10 Connect the display cable to the connector on the display panel.
Postrequisites
1 Follow the instructions from step 1 to step 3 in "Replacing the System
Board" on page 101.
2 Replace the processor heat-sink fan.
See "Replacing the Processor Heat-Sink Fan" on page 65.
3 Replace the processor heat-sink.
See "Replacing the Processor Heat-Sink" on page 61.
4 Replace the I/O board. See "Replacing the I/O Board" on page 94.
5 Replace the speakers. See "Replacing the Speakers" on page 57.
6 Replace the power-supply unit.
See "Replacing the Power-Supply Unit" on page 85.
7 Replace the I/O board shield.
See "Replacing the I/O Board Shield" on page 82.
8 Replace the I/O cover. See "Replacing the I/O Cover" on page 77.
OM_Book.book Page 116 Saturday, October 6, 2012 12:50 AM