Dell Inspiron One 2330 (Mid 2012) - Manual (Page 26)

26 Touchscreen Board
Replacing the Touchscreen Board
Procedure
1 Align the screw holes on the touchscreen board with the screw holes on
the chassis.
2 Replace the screws that secure the touchscreen board to the chassis.
3 Connect all the touchscreen-board cables to the connectors on the
touchscreen board and secure the latches.
4 Connect the system-board cable to the touchscreen-board cable connector.
5 Align the touchscreen-board shield with the tabs on the chassis and snap
the shield in place.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 22.
2 Replace the stand. See "Replacing the Stand" on page 19.
3 Follow the instructions in "After Working Inside Your Computer" on page 11.
OM_Book.book Page 26 Saturday, October 6, 2012 12:50 AM