Dell Inspiron One 2330 (Mid 2012) - Manual (Page 46)

46 Hard Drive
Replacing the Hard Drive
Procedure
1 Slide the hard drive into the hard-drive cage.
2 Align the screw holes on the hard-drive cage with the screw holes on
the hard drive.
3 Replace the screws that secure the hard-drive cage to the hard drive.
4 Place the hard-drive cage on the chassis and slide it toward the bottom of
your computer. Ensure that the tabs at the bottom of the hard-drive cage
slide into the slots on the chassis.
5 Route the power-supply cable through the routing guide on
the hard-drive cage.
6 Route the optical drive's power and data cable through the routing guides
on the hard-drive cage.
7 Route the hard-drive’s power and data cable through the routing guide on
the hard-drive cage.
8 Connect the power and data cable to the connector on the hard drive.
Postrequisites
1 Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 42.
2 Replace the back cover. See "Replacing the Back Cover" on page 22.
3 Replace the stand. See "Replacing the Stand" on page 19.
4 Follow the instructions in "After Working Inside Your Computer" on page 11.
OM_Book.book Page 46 Saturday, October 6, 2012 12:50 AM