Dell Studio 1558 (Early 2010) - Manual (Page 18)

6. Lift the display panel out of the display cover.
7. Remove the four screws (two on each side of the display panel) that secure the display panel brackets to the display panel and remove the display
panel brackets.
8. Turn over the display panel.
9. Using the display cable pull-tab disconnect the display cable from the display board.
Replacing the Display Panel
1. Follow the instructions in Before You Begin .
2. Connect the display cable to the board at the back of the display panel.
1 screws (4) 2 camera cable pull-tab
3 camera cable 4 display panel
1 display panel brackets (1 left, 1 right) 2 screws (4 total; 2 on each side)
1 display cable connector 2 display cable
3 display cable pull-tab