Dell Studio 1558 (Early 2010) - Manual (Page 29)

Replacing the Battery Latch Assembly
1. Follow the instructions in Before You Begin .
2. Slide the battery latch assembly into place.
3. Replace the screw that secures the battery latch to the battery release latch.
4. Using a small screwdriver, place the spring over the hook on the computer base.
5. Follow the steps in Removing the Battery Latch Assembly in the reverse order.
Back to Contents Page
CAUTION: Ensure the battery latch assembly is properly oriented. The indent for the screw should face up when installing the assembly.