Dell Studio 1558 (Early 2010) - Manual (Page 19)

3. Replace the four screws (two on each side of the display panel) to secure the display panel brackets to the display panel.
4. Connect the camera cable to the connector on the camera.
5. Align the screw holes on the display bracket with the screw holes and guide pins on the display cover and gently lower the display panel into place.
6. Replace the four screws that secure the display panel to the display cover.
7. Replace the display bezel (see Replacing the Display Bezel ).
8. Replace the display assembly (see Replacing the Display Assembly ).
Display Hinges
Removing the Display Hinges
1. Follow the instructions in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display panel without removing the display bracket (see Removing the Display Panel ).
4. Remove the two screws (one on each side) that secure the display hinges to the display cover.
5. Remove the display hinges.
Replacing the Display Hinges
1. Follow the instructions in Before You Begin .
2. Align the holes on the display hinges with the holes on the display cover and replace the two screws (one on each side) that secure the display hinges
to the display cover.
3. Replace the display panel (see Replacing the Display Panel ).
4. Replace the display assembly (see Replacing the Display Assembly ).
Back to Contents Page
1 screws (2) 2 display hinges (2)