Speaker assembly, Removing the speaker assembly, Replacing the speaker assembly – Dell Studio 1558 (Early 2010) User Manual
Page 41
Back to Contents Page
Speaker Assembly
Dell Studio™ 1557/1558 Service Manual
Replacing the Speaker Assembly
Removing the Speaker Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove the palm rest (see
Removing the Palm Rest
).
3.
Remove the screw on the palm rest.
4.
Turn the palm rest over.
5.
Remove the four screws on the speakers.
6.
Release the speaker cable from the securing tabs on the palm rest and take out the speaker assembly.
Replacing the Speaker Assembly
1.
Follow the instructions in
Before You Begin
.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working
inside the computer.
1 screw
1 screws (4) 2 speaker cable