Canon OPTURA10 - Manual (Page 123)

123
Using a Memory Car
d
E
3. Set the camcorder to CARD PLAY (VCR) mode.
Wait until the card access indicator stops flashing.
4. Connect the camcorder to the printer using the cable.
” ” appears when the printer is properly connected to the camcorder. (Does
not appear with movies, or still images that cannot be played back with the camcorder.)
Printing
1. In single image display, select the still image you
wish to print and press the selector dial.
The print setting menu appears.
2. Set the number of copies, the print style and the
trimming settings.
• Selecting the Number of Copies.
• Setting the Print Style ( 124).
• Trimming Settings ( 126).
3. Select [Print] and press the selector dial.
Printing starts. The print setting menu disappears when printing
is complete.
If an error message appears, see Printing Errors ( 127) and Direct Print Related
Messages ( 146).
Selecting the Number of Copies
A maximum of 9 copies can be selected for one still image.
1. In the print setting menu, turn the selector dial so
that appears next to [Copies] and press the
selector dial.
2. Turn the selector dial to select the number of copies and press the
selector dial.
CARD PLAY (VCR) CARD CAMERA PLAY (VCR) CAMERA
Print SET