Canon OPTURA10 - Manual (Page 135)

135
Using a Memory Car
d
E
Connecting to a Computer Using a USB Cable
You can download images from the memory card to a computer using the supplied
USB cable. With the supplied software, you can easily download, browse and archive
images, and arrange still images for printout.
For instructions on how to connect the camcorder to the computer, and
install and operate the software, refer to the DIGITAL VIDEO SOLUTION
DISK Software Instruction Manual.
• Refer also to the computer instruction manual.
• “PC CONNECT ” appears to indicate that the camcorder is
connected to the computer via USB cable.
❍ Do not disconnect the USB cable, remove the memory card, change the
position of the POWER switch or turn off the camcorder and computer while
data is being transferred to the computer (while the camcorder’s card access
indicator is flashing). Doing so may damage the memory card’s data.
❍ Operation may not work correctly depending on the software and the
specifications/settings of your computer.
❍ The image file on your memory card and the image files saved on the hard disk
drive of your computer are valuable, original data files. If you wish to use
image files on your computer, make copies of them first, and use the copied
file, retaining the original.
❍ We recommend powering the camcorder from a household power source
while it is connected to the computer.
❍ For transferring recordings from to a computer using a DV cable, see p. 100.
❍ Still images/movies recorded on a tape cannot be transferred to a computer via
USB interface.
PC CONNECT