Canon OPTURA10 - Manual (Page 86)

86
Using the Full Range
of Featur
es
E
Photo Search/Date Search
You can search for a still image recorded
anywhere on the tape with the photo search
function, or locate the change of the
date/time zone with the date search function.
1. Press the SEARCH SELECT button to choose between
photo search and date search.
“PHOTO SEARCH” or “DATE SEARCH” appears.
2. Press the
+ or - button to begin searching.
• Press the
+ button to search forward and the - button to
search backward.
• Press more than once to search for further still images or date
changes (up to 10 times).
• Press the
+ or - button to change the search direction.
• Press the 3 (stop) button stop searching.
❍ Photo search: A still image recorded very close to the point you start the search
may not be detected.
❍ Date search: A recording of longer than a minute per date/area is required.
❍ Date search: Playback may start slightly before or after the date change.
❍ Date search may not function if the data code is not correctly displayed.
CARD PLAY (VCR) CARD CAMERA PLAY (VCR) CAMERA
REW PLAY
STOP
FF
ZERO SET
MEMORY
12bit
AUDIO OUT
SEARCH SELECT DATA CODE
INDEX SLIDE SHOW CARD
REW PLAY
STOP
FF
ZERO SET
MEMORY
12bit
AUDIO OUT
SEARCH SELECT DATA CODE
INDEX SLIDE SHOW CARD
SEARCH SELECT button
Search buttons
STOP 3 button