Canon OPTURA10 - Manual (Page 87)

87
Using the Full Range of Featur
es
E
Returning to a Pre-marked Position
If you wish to return to a particular scene
later, mark the point with the zero set
memory and the tape will stop at that point
when you rewind/fast forward the tape.
1. Press the ZERO SET MEMORY button at the point
you wish to return to later.
• “0:00:00 ” appears.
• To cancel, press the ZERO SET MEMORY button again.
2. When you have finished playback, fast forward or
rewind the tape.
• “RTN 1” or “` RTN” appears.
• The tape stops automatically at “0:00:00”.
• The tape counter changes to time code.
❍ Time code and tape counter display may not match accurately.
❍ The zero set memory may not function correctly when blank sections exist on
the tape.
❍ If you remove the tape, the zero set memory is canceled and the counter
display shows the time code.
CARD PLAY (VCR) CARD CAMERA PLAY (VCR) CAMERA
REW PLAY
STOP
FF
ZERO SET
MEMORY
12bit
AUDIO OUT
SEARCH SELECT DATA CODE
INDEX SLIDE SHOW CARD
ZERO SET
MEMORY
button
REW ` button
PLAY e button
FF 1 button
STOP 3 button