Using the camcorder abroad – Canon OPTURA10 User Manual

Page 149

Advertising
background image

149

Additional

Information

E

When condensation is detected:

❍ The camcorder stops operating and the warning message “CONDENSATION HAS

BEEN DETECTED” appears for approx. 4 seconds and

h starts flashing.

❍ If a cassette is loaded, the warning message “REMOVE THE CASSETTE” appears and

v starts flashing. Remove the cassette immediately and leave the cassette
compartment open. Leaving the cassette in the camcorder may damage the tape.

❍ A cassette cannot be loaded when condensation is detected.

Resuming use:

❍ It takes about 1 hour until the water droplets evaporate. After the condensation

warning stops flashing, wait for 1 more hour before resuming use.

Using the Camcorder Abroad

Power Sources

You can use the compact power adapter to operate the camcorder and to charge

battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz.

Consult the Canon Service Center for information on plug adapters for overseas use.

Playback on a TV Screen

You can only play back your recordings on TVs with NTSC system. The NTSC system is

used in the following countries/areas:

American Samoa, Antigua, Aruba, Bahamas, Barbados, Bermuda, Bolivia, Canada,

Chile, Columbia, Costa Rica, Cuba, Ecuador, El Salvador, Guam, Guatemala, Greenland,

Haiti, Honduras, Jamaica, Japan, Korea, Mexico, Micronesia, Myanmar, Nicaragua,

Panama, Peru, Philippines, Puerto Rico, Saint Kitts and Nevis, Saint Lucia, Saint Vincent

and the Grenadines, Surinam, Taiwan, Trinidad and Tobago, USA, Venezuela, Virgin

Islands.

Advertising
This manual is related to the following products: