Dell PowerEdge SC1420 - Manual (Page 42)

5. Ensure that the VRM is properly installed for processor 1. See " Installing the VRM " in "Installing System Components."
6. Close the system. See " Closing the System ."
7. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
8. Run the appropriate online diagnostic test.
If the tests fail or the problem persists, continue to the next step.
If only one processor is installed, see " Getting Help ."
9. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
10. Open the system. See " Opening the System ."
11. Remove processor 1 and the VRM. See " Removing the Processor " and " Removing the VRM " in "Installing System Components."
To locate the processors and VRM, see Figure A -3 .
12. Close the system. See " Closing the System ."
13. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
14. Run the appropriate online diagnostic test.
If the tests complete successfully, go to step 20 .
15. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
16. Open the system. See " Opening the System ."
17. Replace processor 0 with another processor of the same capacity. See " Installing a Processor " in "Installing System Components."
18. Close the system. See " Closing the System ."
19. Run the appropriate online diagnostic test.
If the tests complete successfully, replace processor 0. See " Getting Help ."
If the tests fail, see " Getting Help ."
20. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
21. Open the system. See " Opening the System ."
22. Reinstall processor 1 and the VRM that you removed in step 11 . See " Installing a Processor " and " Installing the VRM " in "Installing System
Components."
23. Close the system. See " Closing the System ."
24. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
If the problem persists, see " Getting Help ."
Back to Contents Page