Figure 7, Inch drive bay, proceed to, Step 6 – Dell PowerEdge SC1420 User Manual
Page 61
Advertising
If you are installing a drive in the hard-drive bay, proceed to
.
Figure 7-6. Installing Drive Rails
6.
Attach the adapter rails to the adapter by aligning the screw holes on the adapter with the screw holes on the rails and then inserting and tightening
all four screws (two on each rail). See
7.
Slide the adapter into the 5.25-inch drive bay until the tabs on the rails securely click into position. See
Figure 7-7. Installing the Adapter Rails
Figure 7-8. Installing the Adapter
8.
9.
Remove the hard-drive cooling shroud from the system.
10.
Slide the new drive into the drive bay or the adapter until the tabs on the rails securely click into position.
Advertising