Dell Metered PDU LCD - Manual (Page 34)

34 |
LCD Operation
Table 6 describes the values on the Input Status screen display.
Table 6. Input Status Screen
Status Description
Input Voltage (V) Present average of the total input voltage for all three rPDU phases, reported in Volts (V).
NOTE: If any phase fails to report voltage, the voltage for the remaining phases is averaged.
Input Wattage (W) Calculated value of the overall input wattage of the rPDU, reported in Watts (W). This is also
called active power.
Input Volt-amperes (VA) Calculated value of the overall input volt-amperes (VA) of the rPDU. This is also called
apparent power.
Main Menu Selections
The rPDU menu selection hierarchy provides useful performance information, alarms, events, identification, and
configuration settings.
Make a selection from the rPDU Main Menu to retrieve performance monitoring data, review operation log
information, retrieve system identification information, or enter a configuration settings (see Figure 23).
Figure 23. Main Menu Selections