Dell Metered PDU LCD - Manual (Page 53)

53 Serial Interface Operation |
Figure 30. Define Serial Connection
8 On the Properties dialog for the port you selected, set the Port Settings values from the drop-down lists
(see Table 13).
Table 13. Serial Connection Port Settings
Port Setting Value
Baud Rate 9600
Data Bits 8
Parity None
Stop Bits 1
Flow Control None
9 The HyperTerminal session window opens for the connection you selected. The cursor is poised at the
command line to begin your session.
10 Continue to one of the following sections to configure the network settings:
“Configuring the Network with a DHCP Server” on page 54
“Configuring the Network without a DHCP Server” on page 55