Dell Dimension 9200 - Manual (Page 102)

102
Removing and Installing Parts
Replacing the Drive-Panel Insert
1 Slide the tab on the left side of the drive-panel insert under the center drive panel tab.
2 Rotate the drive-panel insert into place and snap the drive-panel insert tab over the corresponding tab
on the drive panel.
3 Ensure that the drive-panel insert is correctly seated in the drive panel.
1 center drive-panel tab 2 drive panel 3 drive-panel insert tab
4 drive-panel insert
1
3
2
4
DIM_book.book Page 102 Monday, October 15, 2007 11:04 AM