Dell PowerVault DL2000 - Manual (Page 19)

Configuring The PowerVault DL2 x 00 System With NIC Teaming
The Broadcom Advanced Control Suite (BACS) is preinstalled on the appliance. You use BACS to configure, manage,
and team Network Interface Controllers (NICs) on the PowerVault DL2
x 00 system. The benefits of teaming include traffic
load balancing and fault tolerance.
If the Team Management button is not present in the lower left corner of the BACS management tool, you must install
the Broadcom teaming software. Run setup.exe at C:\Install\BroadcomAdvanced\Driver_Management_Apps_Installer.
Follow the installation instructions and when prompted, select the Broadcom Advanced Server Program (BASP) driver
to be installed on the local hard drive.
For more information about configuring NIC teaming, see Configuring Teaming in the
Broadcom NetXtreme II Network
Adapter User Guide at support.dell.com/manuals.
For optimal backup performance, use the CommVault Data Interface Pairs tool. For more information, go to
documentation.commvault.com/dell and click Simpana → Index → Network → Data Interface Pairs.
19