Dell PowerVault DL2000 User Manual
Page 40
Figure 14. Simpana 9.0 Post Recovery
14. Click OK to continue with the restore.
15. If prompted to stop the Simpana services to proceed with the restore, click Yes.
16. When the restore is complete, close the CommServeDisasterRecoveryGUI.
17. Click Launch the Service Control Manager from the Home tab of the appliance management console to start the
services.
18. Close the Service Control Manager.
NOTE: When the restore operation is complete, CommVault Simpana services are started. As a result,
volumes on the storage enclosure(s), which were configured using automatic disk configuration are available
under the original location of C:\DiskStorage. All volumes from the C:\DiskStorage_Recovered directory are
unmounted and no longer visible at that location.
NOTE: Wait until all volumes from the C:\ DiskStorage_Recovered directory are unmounted and no longer
visible at that location before proceeding to the next step. This process can take upto five minutes.
NOTE: The CommVault license key is stored in the CommServe database. After importing the database, all
features and licenses are restored.
19. From the CommCell console, navigate to the CommCell browser tree view.
40