Installing the pcie card holder – Dell PowerVault DR4100 User Manual
Page 48
Figure 19. Removing and Installing the PCIe Card Holder
1. PCIe card holder
2. release tab
Installing The PCIe Card Holder
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
CAUTION: Do not use your system without the PCIe card holder installed. The PCIe card holder is necessary to
ensure proper system cooling.
1.
Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.
2.
Open the system.
3.
Align the PCIe card holder with the projection on the chassis and push it down until firmly seated.
4.
If applicable, replace the full-length PCIe card.
5.
Close the system.
6.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
48