Dell Acceleration Appliances for Databases - Manual (Page 11)

About the Command-Line Interface (CLI)
________________________________________________________________________
With the Command-Line Interface (CLI) you can perform basic configuration tasks, as well as fine-
tune and manage your ION Accelerator system.
For an introduction to ION Accelerator, as well as First Boot instructions and a variety of best
practices and configuration information, refer to the ION Accelerator Configuration Guide.
Many of the CLI commands can affect data or configurations on a wide variety of devices. Be
sure to use the commands with caution, or try them on a test system if you are unsure of
their potential effects. Use the
--help
option with any command to see its command syntax
and usage.
Command Groups
The commands are arranged in the following groups:
• Help, etc. • Bus • Chassis • Cluster
• CNA • Config • CPU • Drive
• Fan • FIO • Format • Inigroup
• Initiator • Kdump • Log • LUN
• Manage • Network • Node • Pool
• Port • Profile • PSU • RAID
• Rules • SAFT • Service • Shell
• SNMP • Software • SSH • System
• Target • Temp (Temperature) • View • Volume
11