Dell Acceleration Appliances for Databases - Manual (Page 14)

•
config –db
(lists all the current settings for storage information)
•
node:update
(available in the Setup process)
•
pool:create
(when creating more than one storage pool)
•
pool: delete
(pools can be deleted only in the CLI, not the GUI)
• pool:update
•
raid:create
(creating multiple RAIDs)
•
raid:delete
,
raid:get
,
raids
,
raid:update
•
soft:dropbox
,
soft:history
,
soft:revert
,
soft:version
•
volume:create
(if the storage profile is Direct Access/JBOD)
COMMON OPTIONS
The options that are shared by each command in the CLI are described below. They are
mentioned throughout the Command Reference section, but the descriptions are not repeated.
--display (brief|wide|list|table|xml|json|any)
Type of display/formatting. Also:
-dt, -dl, -dx, -dw, -db, -dj
--display-table
Display as a table. For example:
admin@url> nodes -dt
ID Status Cluster IP Number
------------------------------------------------------
fiona MEMBER 192.168.1.1 1
192.168.2.1
fionb MEMBER 192.168.1.2 2
192.168.2.2
14