Dell Acceleration Appliances for Databases - Manual (Page 69)

NETWORK COMMANDS
The Network commands enable you to see details for network addresses, including Ethernet
ports, IP addresses, and subnets.
network:addrs
Shows network address details for components of the ION Accelerator system.
Syntax
network:addrs [options]
Options
(See
help –-all
for details on all options.)
Example
This shows network address details for Ethernet ports:
> network:addrs
eth3 inet 192.168.20.49/24
eth0 inet 10.60.34.49/24
eth5 inet 192.168.30.49/24
eth6 inet 192.168.1.2/24
eth7 inet 192.168.2.2/24
network:ping
Specifies a target host on the network to ping.
Syntax
network:ping [options] target
Options
--count or -c
Number of pings to execute (defaults to 3)
(See
help –-all
for details on all options.)
Arguments
target
IP address of the host to ping
69