Dell Acceleration Appliances for Databases - Manual (Page 49)

fan:get
Gets details about a fan.
Syntax
fan:get [options] id
Options
–-node
or
-n
<address(es)>
Issue this command to one or more nodes in the cluster.
--cluster
Issue this command to all instances in the cluster.
(See
help –-all
for details on all other options.)
Arguments
id
The ID, UUID, or WWPN of the fan to get information for
Example
This gets details about the fan with the ID
fan1
.
> fan:get fan1
FIO COMMANDS
The
fio
commands provide information about the ioDrive devices used in the ION Accelerator
appliance. These commands are similar to the Command-Line Utilities available with the VSL
software.
fio:beacon
Enable or disable the beacon for an ioDrive attached to a device control node (using the
--on
or
--off
options), or return its status (using neither
--on
nor
--off
).
Syntax
fio:beacon [options] device-node
Options
--on
Enable the beacon.
--off
Disable the beacon.
49