Dell Acceleration Appliances for Databases - Manual (Page 81)

PROFILE COMMANDS
The
profile
commands enable you to create and examine profile configurations for storage
pools.
profile:create
Creates a storage pool with desired characteristics. You can run
profile:create –dt
to see
the available profile types.
A storage profile created in the CLI will not be reflected or available in the GUI.
Syntax
profile:create [options] profile (name)
Options
--slot
or
-s
<number(s)>
Allow the use of the specified slot; by default all are allowed. Use slot or
node/slot.
--slot-list
<number(s)>
Use the specified list of slots
[slot# slot#]
syntax. Use slot or
node/slot.
--slot-count
or
--drive-count
or
-d
<number>
Number of drives to use with the profile; the default is all
--dry-run
List the actions to perform, but do not perform them.
–-node
or
-n
<address(es)>
Issue this command to one or more nodes in the cluster.
--cluster
Issue this command to all nodes in the cluster.
(See
help –-all
for details on all other options.)
Arguments
profile
Profile type to use:
maximum_performance
,
reliable_performance
,
reliable_capacity
, or
direct
81