Dell Acceleration Appliances for Databases - Manual (Page 47)

drive:get [options] id
Options
–-boot
or
-b
Specify that the drive is a boot device.
–-rescan
or
-r
Force rescan of boot devices.
–-node
or
-n
<address(es)>
Issue this command to one or more nodes in the cluster.
--cluster
Issue this command to all instances in the cluster.
(See
help –-all
for details on all other options.)
Arguments
id
The ID, UUID, or WWPN of the drive to get information for
Example
This gets information about the drive named
fioa
(from
drive:list
):
> drive:get fioa
Id fioa
Capacity 1,205.00 GB
Device /dev/fioa
Slot 3
Adapter 1150D0032
Board Name ioDrive2 Adapter Controller
UUID 1150D0032-1121
Err/Warn []
FAN COMMANDS
The Fan commands get information about available fans.
Fan speed may be reported either as a percentage or in RPM. Check the units that apply to
your particular platform.
fans
or
fan:list
Lists the available fans.
Syntax
fan:list [options]
47