Dell DX6012S - Manual (Page 13)

About Your System
13
3 NMI button Used to troubleshoot software and
device driver errors when using certain
operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do so
by qualified support personnel or by the
operating system's documentation.
4 System identification
button The identification buttons on the front
and back panels can be used to locate
a particular system within a rack.
When one of these buttons is pushed,
the blue system status indicator on the
back blink until one of the buttons is
pushed again.
5 Hard drives Up to twelve 3.5-inch hot-swappable
SAS or SATA drives.
6 System identification
panel A slide-out panel for system information
including the Express Service tag,
embedded NIC MAC address, and
iDRAC6 Enterprise card MAC address.
7 USB connector Connects USB devices to the system.
The ports are USB 2.0-compliant.
8 Video connector Connects a monitor to the system.
Item Indicator, Button,
or Connector Icon Description
book.book Page 13 Friday, February 26, 2010 11:22 AM