Dell DX6012S - Manual (Page 38)

38
About Your System
Warning Messages
A warning message alerts you to a possible problem and prompts you to
respond before the system continues a task. For example, before you format
a diskette, a message warns you that you may lose all data on the diskette.
Warning messages usually interrupt the task and require you to respond
by typing y (yes) or n (no).
NOTE:
Warning messages are generated by either the application or the
operating system. For more information, see the documentation that
accompanied the application or operating system.
Diagnostics Messages
The system diagnostic utilities may issue messages if you run diagnostic tests
on your system. See "Running the Embedded System Diagnostics" on
page 146 for more information about system diagnostics.
Write fault
Write fault on
selected drive
Faulty USB device, USB
medium, optical drive
assembly, hard drive, or hard
drive subsystem. Replace the USB medium or
device. Ensure that the USB,
SAS backplane, or SATA
cables are properly
connected.
See "Troubleshooting a USB
Device" on page 130,
"Troubleshooting a Hard
Drive" on page 139,
"Troubleshooting a Hard
Drive" on page 139,
and "Troubleshooting a Hard
Drive" on page 139.
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
Glossary at support.dell.com/manuals.
Message Causes Corrective Actions
book.book Page 38 Friday, February 26, 2010 11:22 AM