Dell Inspiron 3500 - Manual (Page 56)

4-20 Dell Inspiron 3500 Portable Computer Service Manual
,QYHUWHUIRU,QFK'LVSOD\$VVHPEO\
&$87,21 7KH IROORZLQJ SURFHGXUH VKRXOG EH SHUIRUPHG RQO\ E\
GHSRW UHSDLU WHFKQLFLDQV
To remove the inverter, see Figure 4-14 and follow these steps:
1. Remove the display assembly.
2. Remove the bezel.
3. Disconnect the inverter signal cable from the side-lift ZIF connector CN1 on
the left side of the inverter by gently pulling each side of the ZIF connector,
and then pulling out the cable.
4. Disconnect the wraparound LCD FPC cable on the left side of the inverter.
The cable wraps around the inverter and connects to itself.
5. Remove (and save for installation) any Kapton-tape securing cables on the
right side of the inverter.
6. Lift the inverter partially up to make disconnecting the remaining cables
easier.
7. Disconnect the LED cable from connector CN3 on the right side of the
inverter.
8. Disconnect the LCD cable from connector CN2 on the right side of the
inverter.
9. Remove the inverter.