Dell Inspiron 3500 - Manual (Page 75)

Removing and Replacing Parts 4-39
3DOPUHVW$VVHPEO\
)LJXUH  3DOPUHVW $VVHPEO\ 6FUHZV³%RWWRP RI &RPSXWHU
To remove the palmrest assembly, see Figures 4-15 and 4-23 and follow these
steps:
1. Remove the display assembly.
2. Remove the keyboard.
3. Turn the computer face down.
4. Remove the seven 19-mm palmrest screws from the bottom of the com-
puter (see Figure 4-23).
5. Turn the computer face up.
6. Remove the palmrest assembly.
After installing the palmrest assembly, make sure that the battery-bay release
latch and the options-bay release latch operate smoothly. If they do not, slightly
loosen the two palmrest assembly screws that secure the latches so that the
latches move easily.
7\SH RI 6FUHZ 7RUTXH
FPH 2.5 x 19 (7) 3.5–4.0 kgf-cm
16-mm
screws (7)